Bolts & Nuts

Stainless Steel Disc Bolt GSXR Suzuki Disc Rotor Bolt. Great for replacing rusty originals! Manufactured from 316 Stainless Steel, these are a brighter and corrosion resistant version of the original bolts - they look stunning fitted to the bike! The dimensions of the bolts are as follows. 8mm thread diameter x 1.25mm thread pitch. 33mm length, 16mm head diameter with a 6mm Allen key size. Directly underneath the head is a shoulder which has an O/D of 10mm and also a length of 10mm. Please see below for silhouette. They can be torqued to manufacturers' original settings. Priced individually and listed in model specific bike sections where fitment has been established.

Stainless Steel Disc Rotor Bolts – Bolt set to mount the disc rotor to the wheel. A replica of the OEM design but manufactured in superior quality grade 316 Stainless Steel. Machined with rolled threads, polished to a smooth mirror finish and highly resistant to corrosion these bolts make a great replacement for rusty originals. Compliments front axle nuts perfectly. Sets are available for Front and Rear discs for most models where fitment has been established. Please see fitting instructions provided for the relevant torque settings. Stainless Steel is also available in black, which not only looks great but has other benefits too.. This beautiful long lasting black finish results from an application of Diamond Like Carbon Coating (DLC) This gives supreme hardness and corrosion resistance provided by a nano composite coating, which increases the fastener lifetime dramatically and helps to prevent galling. By incorporating them right from the beginning, the overall system cost can be held level or may even be reduced. Please note that due to this special coating Black Stainless Steel is not identical to our Black Aluminium.

Stainless Steel Front Brake Caliper Mount Bolt Kit to mount the front brake calipers to the fork leg. An area of the bike that quickly suffers from rust and corrosion. These alternatives are made from 316 grade Stainless Steel, which offers fantastic corrosion resistance and are machined with rolled threads for a stronger, smoother finish. Sold here in our ever popular race spec design, which benefit from a reduced socket size that has been drilled to 1.6mm on each flat for ease of lock wiring and the inside of the hex is dished for additional weight saving with no compromise in strength. For those who truly value attention to detail. Prefer something a little more subtle? Stainless Steel is also available in black, which not only looks great but has other benefits too.. This beautiful long lasting black finish results from an application of Diamond Like Carbon Coating (DLC) This gives supreme hardness and corrosion resistance provided by a nano composite coating, which increases the fastener lifetime dramatically and helps to prevent galling. By incorporating them right from the beginning, the overall system cost can be held level or may even be reduced. Please note that due to this special coating Black Stainless Steel is not identical to our Black Aluminium.

Stainless Steel Front Brake Caliper Mount Bolt Kit to mount the front brake calipers to the fork leg. An area of the bike that quickly suffers from rust and corrosion. These alternatives are made from 316 grade Stainless Steel, which offers fantastic corrosion resistance and are machined with rolled threads for a stronger, smoother finish. Sold here in our ever popular race spec design, which benefit from a reduced socket size that has been drilled to 1.6mm on each flat for ease of lock wiring and the inside of the hex is dished for additional weight saving with no compromise in strength. For those who truly value attention to detail. Prefer something a little more subtle? Stainless Steel is also available in black, which not only looks great but has other benefits too.. This beautiful long lasting black finish results from an application of Diamond Like Carbon Coating (DLC) This gives supreme hardness and corrosion resistance provided by a nano composite coating, which increases the fastener lifetime dramatically and helps to prevent galling. By incorporating them right from the beginning, the overall system cost can be held level or may even be reduced. Please note that due to this special coating Black Stainless Steel is not identical to our Black Aluminium.

Stainless Steel Rear Brake Caliper Mount Bolt Kit to mount the rear brake caliper to the bracket. An area of the bike that quickly suffers from rust and corrosion, these alternatives are made from 316 grade Stainless Steel, which offers fantastic corrosion resistance and are machined with rolled threads for a stronger, smoother finish. The perfect upgrade. Prefer something a little more subtle? Stainless Steel is also available in black, which not only looks great but has other benefits too.. This beautiful long lasting black finish results from an application of Diamond Like Carbon Coating (DLC) This gives supreme hardness and corrosion resistance provided by a nano composite coating, which increases the fastener lifetime dramatically and helps to prevent galling. By incorporating them right from the beginning, the overall system cost can be held level or may even be reduced. Please note that due to this special coating Black Stainless Steel is not identical to our Black Aluminium.

Stainless Steel Rear Brake Caliper Mount Bolt Kit to mount the rear brake caliper to the bracket. An area of the bike that quickly suffers from rust and corrosion, these alternatives are made from 316 grade Stainless Steel, which offers fantastic corrosion resistance and are machined with rolled threads for a stronger, smoother finish. The perfect upgrade. Prefer something a little more subtle? Stainless Steel is also available in black, which not only looks great but has other benefits too.. This beautiful long lasting black finish results from an application of Diamond Like Carbon Coating (DLC) This gives supreme hardness and corrosion resistance provided by a nano composite coating, which increases the fastener lifetime dramatically and helps to prevent galling. By incorporating them right from the beginning, the overall system cost can be held level or may even be reduced. Please note that due to this special coating Black Stainless Steel is not identical to our Black Aluminium.

Stainless Steel Rear Brake Caliper Mount Bolt Kit to mount the rear brake caliper to the bracket. An area of the bike that quickly suffers from rust and corrosion, these alternatives are made from 316 grade Stainless Steel, which offers fantastic corrosion resistance and are machined with rolled threads for a stronger, smoother finish. The perfect upgrade. Sold here in our ever popular race spec design, which benefit from a reduced socket size that has been drilled to 1.6mm on each flat for ease of lock wiring and the inside of the hex is dished for additional weight saving with no compromise in strength. For those who truly value attention to detail. Prefer something a little more subtle? Stainless Steel is also available in black, which not only looks great but has other benefits too.. This beautiful long lasting black finish results from an application of Diamond Like Carbon Coating (DLC) This gives supreme hardness and corrosion resistance provided by a nano composite coating, which increases the fastener lifetime dramatically and helps to prevent galling. By incorporating them right from the beginning, the overall system cost can be held level or may even be reduced. Please note that due to this special coating Black Stainless Steel is not identical to our Black Aluminium.

Titanium Disc Rotor bolts. A must for any racer or those who simply wish to replace rusty originals! A replica of manufacturers original design but in superior quality material. Our Titanium 6Al -4V (grade 5) bolts are highly corrosion resistant, extremely light (40% weight saving!) and with rolled threads offers excellent strength and quality. Please refer to our product packaging supplied with the goods for torque settings. Why not check out our model specific listing and upgrade you caliper bolts at the same time? Please note if a coloured finish is selected in titanium this may not be identical to our Aluminium range.

Titanium Disc Rotor bolts. A must for any racer or those who simply wish to replace rusty originals! A replica of manufacturers original design but in superior quality material. Our Titanium 6Al -4V (grade 5) bolts are highly corrosion resistant, extremely light (40% weight saving!) and with rolled threads offers excellent strength and quality. Please refer to our product packaging supplied with the goods for torque settings. Why not check out our model specific listing and upgrade you caliper bolts at the same time? Please note if a coloured finish is selected in titanium this may not be identical to our Aluminium range.

Titanium Front Brake Caliper Mount Bolt Kit. To mount the front caliper to the fork leg. An area of the bike that quickly suffers from rust and corrosion. This kit offers better corrosion resistance and is 40 percent lighter than the original bolts. Can be torqued to the manufacturers original setting. Please note the colour finish on titanium is not identical to our Aluminium range. Black Titanium: Long lasting finish resulting from an application of Diamond Like Coating (DLC). This unique finish increases the fastener lifetime and helps to prevent galling whilst providing a supreme hardness and offering the optimum in corrosion resistance thanks to a nanocomposite coating.