Ref: pb-fsu078 | Make: Pro Bolt aluminum & titanium
Material: Aluminium
Our Aluminium fasteners are made from 7075T6 Aluminium, and suitable for use in all non -safety critical areas. They are available in Black, Blue, Gold, Orange Purple, Red and Silver, so you can really make your bike stand out.
Our fairing kits include all the fasteners required to replace the original visible bolts (where applicable)on the:
- Side fairings
- Front mudguard
- Belly pan
- Seat unit
- Nose cone
Fairing kits usually contain a variety of sizes of dome head bolts.
Some kits however will also include Countersunk Bolts and Washers to replicate large headed bolts and Allen bolts to fit inrecesses.
Where Quick Release kits are available for certain models of bike, the 1/4 turn fasteners are offered with a choice of either D-Ring or Allen Key fastening. Clips are also included if applicable.
Kits are easy to use, remove one bolt at a time, and replace with an identical lengthPro-Boltin to your original backing clip. Where this is not possible we include appropriate nuts.
Should you wish to replace any worn original receptacles they are available to order separately.
Also included in the kit is:
- Copper Grease Sachet
- Anti -scratch washers
- Plastic Tubing
- Relevant Allen keys
- Pro-Bolt Decal Sticker
From €30.00
In stock Delivery time unknown ()
Ref: PB-FB520-10 | Make: Pro Bolt aluminum & titanium
0.8mm pitch Dome 12mm O.D. Head Bolt with Allen Key Drive, length measurement is taken from under the head. Material High Tensile Anodised Aluminium Pk x 10
From €13.33
In stock Delivery time unknown ()
Ref: PB-FN5-10 | Make: Pro Bolt aluminum & titanium
Aluminium Full Nuts M5 Pack x 10 0.8mm pitch. 8mm socket size. Standard Full Nut. Material High Tensile Anodised Aluminium.
From €8.69
In stock Delivery time unknown ()
Ref: PB-LCS445 | Make: Pro Bolt aluminum & titanium
Aluminium Countersunk Bolt M4 x (0.7mm) x 45mm Din 7991 Standard Countersunk Bolts with Allen Key Drive, length measurement is taken including the head. Material High Tensile Anodised Aluminium. Unsure what size you need? Why not order one of our progauges and double -check? Take a look here
From €1.26
In stock Delivery time unknown ()
Ref: PB-LFB516E | Make: Pro Bolt aluminum & titanium
Aluminium Dome Head Bolt M5 x (0.8mm) x 16mm Unsure what size you need? Why not order one of our progauges and double -check? Take a look here
From €1.40
In stock Delivery time unknown ()
Ref: PB-LFB525 | Make: Pro Bolt aluminum & titanium
Aluminium Dome Head Bolt M5 x (0.8mm) x 25mm 0.8mm pitch Dome 12mm O.D. Head Bolt with Allen Key Drive, length measurement is taken from under the head. Material High Tensile Anodised Aluminium. Unsure what size you need? Why not order one of our progauges and double -check? Take a look here
From €1.36
In stock Delivery time unknown ()
Ref: PB-LFB616 | Make: Pro Bolt aluminum & titanium
Aluminium Dome Head Bolt M6 x (1.00mm) x 16mm 1.00mm pitch Dome 16mm O.D. Head Bolt with Allen Key Drive, length measurement is taken from under the head. Material High Tensile Anodised Aluminium. Unsure what size you need? Why not order one of our progauges and double -check? Take a look here
From €1.29
In stock Delivery time unknown ()
Ref: PB-LFB630 | Make: Pro Bolt aluminum & titanium
Aluminium Dome Head Bolt M6 x (1.00mm) x 30mm 1.00mm pitch Dome 16mm O.D. Head Bolt with Allen Key Drive, length measurement is taken from under the head. Material High Tensile Anodised Aluminium. Unsure what size you need? Why not order one of our progauges and double -check? Take a look here
From €1.29
In stock Delivery time unknown ()
Ref: PB-LFB825 | Make: Pro Bolt aluminum & titanium
Aluminium Dome Head Bolt M8 x (1.25mm) x 25mm 1.25mm pitch Dome 16mm OD Head Bolts with Allen Key Drive, measurement is taken from under the head. Material High Tensile Anodised Aluminium. Unsure what size you need? Why not order one of our progauges and double -check? Take a look here
From €1.43
In stock Delivery time unknown ()
Ref: PB-CS535-10 | Make: Pro Bolt aluminum & titanium
Aluminium Countersunk Bolt M5 x (0.8mm) x 35mm Pack x 10 High Tensile Anodised Aluminium Countersunk Bolts are measured in length including the head, bolts. We can supply countersunk washers separately which are designed to be used with this type of bolt. Ideal where a large diameter spread is required to prevent bolts pulling through bodywork etc and where a low head profile is essential. By using a separate Bolt and Washer we can obtain a larger outside diameter than would otherwise be possible.
From €13.62
In stock Delivery time unknown ()
Ref: PB-CS625-5 | Make: Pro Bolt aluminum & titanium
Aluminium Countersunk Bolt M6 x (1.00mm) x 25mm Pack x 5 High Tensile Anodised Aluminium Countersunk Bolts are measured in length including the head, bolts. We can supply countersunk washers separately which are designed to be used with this type of bolt. Ideal where a large diameter spread is required to prevent bolts pulling through bodywork etc and where a low head profile is essential. By using a separate Bolt and Washer we can obtain a larger outside diameter than would otherwise be possible.
From €6.52
In stock Delivery time unknown ()
Ref: PB-CS635-5 | Make: Pro Bolt aluminum & titanium
Aluminium Countersunk Bolt M6 x (1.00mm) x 35mm Pack x 5 High Tensile Anodised Aluminium Countersunk Bolts are measured in length including the head, bolts. We can supply countersunk washers separately which are designed to be used with this type of bolt. Ideal where a large diameter spread is required to prevent bolts pulling through bodywork etc and where a low head profile is essential. By using a separate Bolt and Washer we can obtain a larger outside diameter than would otherwise be possible.
From €6.81
In stock Delivery time unknown ()
Ref: SCOTTSO-6030 | Make: Scottoiler chain oiler
Micro vSystem / Automatic Chain Oiler
€100.83
In stock Delivery time unknown ()
Ref: PB-pload17b | Make: Pro Bolt aluminum & titanium
Aluminium Pre-Load Adjusters 17mm Hex (Pair) Blue Not only do they look great, but they are functional as well. It's now so easy to adjust your spring compression to allow for pillion passengers or different road types. Sold in pairs complete with steel grub screws and Allen key. Just pick your colour. Material High Tensile Anodised Aluminium.
€38.14
In stock Delivery time unknown ()
Ref: PB-pload17g | Make: Pro Bolt aluminum & titanium
Aluminium Pre-Load Adjusters 17mm Hex (Pair) Gold Not only do they look great, but they are functional as well. It's now so easy to adjust your spring compression to allow for pillion passengers or different road types. Sold in pairs complete with steel grub screws and Allen key. Just pick your colour. Material High Tensile Anodised Aluminium.
€38.14
In stock Delivery time unknown ()
Ref: PB-SKDUC10B | Make: Pro Bolt aluminum & titanium
Aluminium Screen Kit (4mm Italian Bikes) 10 Bolts Blue Complete the look of your fairing. This Kit contains bolts, nuts and Anti -Scratch washers to fit around your screen and compliments our fairing kit. Material High Tensile Anodised Aluminium.
€25.86
In stock Delivery time unknown ()
Ref: SCOTTSO-8005-30 | Make: Scottoiler chain oiler
xSystem 3.0 - electronic chain lubrication system - universal
€292.41
Usually available at the manufacturer Delivery time unknown ()
Ref: pb-qrclip1017 | Make: Pro Bolt aluminum & titanium
Material: Aluminium
Aluminium Quick Release D-Ring 17mm Pack x 10 Pro-Bolt's own style anodised Aluminium 6mm quarter turn fastener. Used by Racers our D-Ring 1/4 turn fasteners are super lightweight and super quick to use. Length measured from under the head to the tip. Included in the pack are anti -scratch plastic washers to protect the fairing and steel 'grippa' washers to place on the stud at the back of the fairing to prevent clips dropping out when loosened. Please note backing plates are not included but are available to order separately as both slide and rivet on fixings.
From €58.56
In stock Delivery time unknown ()
Ref: PB-QRPACKAKRIVET17 | Make: Pro Bolt aluminum & titanium
Aluminium Quick Release/Clip 6 Allen Key 17mm Pack x 10 Pro-Bolt's own style anodised Aluminium 6mm quarter turn fastener. Used by Racers our Allen Key 1/4 turn fasteners are super lightweight and super quick to use. Length measured from under the head to the tip. Supplied here in packs of 10 with anti -scratch washers, steel 'Grippa' washers to prevent the fastener from dropping out when released, rivet on backing clips and rivets.
From €68.81
In stock Delivery time unknown ()
Opening hours customer service:
Mon-Fri: 9 am - 12 pm and 1 pm - 5 pm
Saturday: 9 am - 12 pm
ATTENTION: We are temporarily available by phone only from 1pm. For urgent questions, please email info@bike-design.com
Contact usBike Design Benelux accepts the following payment methods:
Bike Design helps passionate motorcyclists get the best out of their bike, since 1993. Our team rides off-roads, motorscooters, road race, Harley, touring bikes and allroads, so we know precisely how our products contribute to a better ride. Our shelves only contain products of which we are satisfied users ourselves.
Each year, over 1.000 motorcycle dealers and thousands of returning end users give us their faith – and feedback – so we know exactly what to recommend. So check out which renown brands we have in store for your bike and feel free to ask our opinion or advice!
Bike Design Benelux
Industrieterrein Hoogveld
Vriesenrot 14
B-9200
Dendermonde
Belgium
info@bike-design.be
Phone: +32 52 45.33.61
Fax: +32 52 45.33.71
VAT: BE 0451.634.077
