Radiator cleaner 2K (300 ml) Préventif/Curatif

Two-component descaler and oil remover for cleaning oil-contaminated cooling circuits: dissolves and disperses oily scale and sludge caused by a broken cylinder head gasket or oil passage in the cooling circuit. Formulated with selected lubricants, it protects hoses and other metal parts during the cleaning process. Restores optimum operation of the radiator, thermostat and pumps, guaranteeing cooling performance and system longevity. Miscible with all common coolants. * Complete two-component treatment * Highly effective formula * High oil-removing power

Technical data:

• Physical state: Liquid
• Colour: yellow
• Odour: odourless
• pH-Value (at 20 °C): 0-1
• Packaging: 300ml
• Melting point: < 0 °C
• Boiling point: > 100 °C
• Density (at 20°C): 1.07 g/cm³.
• Easily soluble

Storage:

• For long-term storage, keep in a dry, well-ventilated area away from direct sunlight and frost.
• Recommended storage temperature 5°C - 25°C.
• Recommended application temperature 20°C.

Instructions for use: Shake bottles well before use. Empty bottles K1 (Component 1) and K2 (Component 2) into the radiator or expansion tank. Switch on the passenger compartment heater. Start the engine and run at medium speed for about 15 minutes at operating temperature. Allow to cool, drain and purge the system with plenty of clean water. Remove the non-integrated expansion tanks and clean them by hand using a K1 and K2 solution. Finally, top up with new coolant in accordance with the manufacturer's instructions. 1 dose of 300ml treats up to 8 litres of oil.