Hydro-alcoholic disinfectant - Hand/Surface (500 ml)

Our Hydroalcoholic Hand/Surface Disinfectant aerosol ensures the contact time required for rapid disinfecting action, without leaving residues. Does not require water. A DISINFECTANT with BACTERICIDE - FUNGICIDE - VIRUCIDE properties for the reduction of hand-carried microbial contamination, reinforcing the hygiene of hands, instruments and handling.

• Easy to use
• Rapid disinfection
• Compatible with food surfaces
• Contains glycerine: prevents the skin from drying out after frequent use.
• Does not leave hands slippery or sticky
• Biocidal functions to reduce germs carried by the hands
• Dries quickly, without dehydrating or flaking the skin

Technical data:

• Physical state: Aerosol
• Colour: Transparent
• Packaging: 500 ml
• Odour: Ammonia
• Initial boiling point and boiling range: -44,5 °C
• Flash point: -97 °C
• Lower Explosive Limit: 1.5 Vol.%.
• Upper explosion limit: 15.0 Vol.%.
• Self-ignition temperature: The product does not ignite spontaneously.
• Density (at 20°C): 0.76 g/cm³.
• Vapour pressure (at 20°C): 59 hPa
• Organic solvents: 81.0
• Water: 19.0

Storage:

• For long-term storage, keep in a dry, well-ventilated area away from direct sunlight and frost.
• Recommended storage temperature 15°C - 30°C.
• Recommended application temperature 20°C.

Instructions for use: Spray onto the surface to be disinfected from a distance of 10-15 cm, after cleaning it first. Remove any excess product with a clean cloth. Our multi-substrate formula does not harm plastics, leather or fabrics. After use, purge the can upside down. CAUTION: Do not spray on surfaces exposed to a heat source.

Disinfection:

• Hands before use or before putting on handling or protective gloves.
• The outer surface of staff gloves before and after operations, when handling requires specific hygiene precautions.
• Small surfaces or objects (cleaned beforehand) used in common

Applied to clean, dry hands/surfaces, this disinfectant has a bactericidal, fungicidal and virucidal action in compliance with TP1, TP2 and TP4 standards, due to its alcohol content of over 70%.